Curious about technical (tec) diving, but not sure about jumping into a course? Discover Tec is a short confined water experience that allows you to give technical diving a try. You get to wear all the extra tec diving gear and take it for a test dive. Your PADI Tec Instructor may introduce a few basic skills, such as primary to secondary regulator switch and gas shutdown procedures.
The PADI Tec 40 course is where you transition from recreational scuba diving to technical diving. It’s a great place to start because it’s the first subdivision of the full PADI Tec Diver course and bridges the gap between no stop diving and full technical deep decompression diving. You gain experience and begin building the knowledge and skills you need to continue your tec diver training. You will qualify to make limited decompression dives to 40 metres/130 feet.
The PADI Tec 45 course is the second part of the full PADI Tec Deep Diver program. You’ll extend your depth limit to 45 metres/145 feet and learn to plan and execute repetitive decompression dives using a single stage/decompression cylinder. It puts you in a complete tec diving rig, which can be either backmount or sidemount. You’ll also make accelerated decompression dives using EANx or pure oxygen. This is a course where you’ll rise to the challenge and make the commitment to become a technical diver.
The third part of the full PADI Tec Deep Diver program is Tec 50. As a Tec 50 diver, you show that you’ve developed competency as a tec diver and have the skills to dive to a maximum of 50 metres/165 feet. You know how to make extended, accelerated decompression stops using up to two gases. It’s not easy to reach this level and earning your Tec 50 certification opens the door to deeper diving expeditions.
The PADI Enriched Air Diver course is the most popular diver specialty course and the number of technical divers is on the rise, which means that lots of scuba divers want enriched air and gas blends. The Tec Gas Blender course teaches you to blend enriched air nitrox and helium-blend gases using one or more blending methods. Being the blender is a key job at a busy PADI Dive Center or Resort and your work allows other divers to do what they love to do – scuba dive.
If you’ve looked into technical diving, you realize that tec divers always wear more than one tank. Sidemount is an increasingly popular way to configure multiple cylinders for technical diving. You can enter the world of tec diving with the Tec Sidemount Diver course and apply what you learn to other TecRec courses. Your instructor may offer to integrate this course with the Tec 40, Tec 45 or Tec 50 courses.
10 Devon Road, Frankton, Hamilton 3204
Phone Hamilton: 027 5008225
Phone Auckland: 021 615070
Mon-Fri ------------------------- 9am - 5:30pm
Sat ----------------------------- 9am - 4:00pm
Sun ---------------------------- Closed